PRODUCTS
1852-90 Long Handle Straight Plier 90 | 11-Inch Angled Tip
1852-90 Series: 11-Inch Long Handle Straight Plier (90° Angled Tip)
- Pince à becs demi-ronde coudes 90°
- Szczypce proste 90° z długim uchwytem
- Gerade 90°-Zange mit langem Griff
- Alicate de boca largas angulado 90°
- زرادية مستقيمة بمقبض طويل 90 درجة
- คีมปากตรงด้ามยาว 90 องศา
- 1852-90
- 長手柄 90° 特殊鉗
Long Handle Straight Plier 90 (Model 1852-90) is an industrial-grade precision tool engineered for maximum reach in confined spaces. Forged by Hans Tools from high-tensile Chrome Vanadium (Cr-V), the Long Handle Straight Plier 90 features an 11-inch (280mm) overall length, providing the mechanical advantage needed to access recessed areas of engine bays and industrial control cabinets. The specialized 90° angled jaws allow for a secure vertical grip while the handles remain horizontal, ensuring the technician maintains a clear line of sight during delicate extractions.
| 1852 | L mm | L3 mm | W3 mm | W4 mm | T1 mm |  g |  pcs |
|---|---|---|---|---|---|---|---|
| 90 | 255 | 49 | 18.2 | 6.5 | 10 | 330 | 6 |
Feature
Extra-Long 280mm Reach & 90° Tip Geometry
The 1852-90 Long Handle Straight Plier 90 is built for elite mechanical efficiency:
- Deep-Access Reach: The extended handle of the Long Handle Straight Plier 90 allows for safe operation away from heat sources or moving parts, reaching depths that standard pliers cannot touch.
- 90-Degree Right-Angle Jaws: The tip of the Long Handle Straight Plier 90 is precision-bent to a 90° angle. This is critical for pulling O-rings, cotter pins, and vacuum lines that are oriented perpendicular to the technician.
- Serrated Non-Slip Grip: The internal jaw surfaces are cross-hatched and induction-hardened, ensuring that the Long Handle Straight Plier 90 maintains a “zero-slip” hold on small wires or greasy fasteners.
B2B Procurement & Industrial Mobility
The Long Handle Straight Plier 90 1852-90 is a strategic asset for:
- Automotive Technical Centers: Removing stubborn clips and connectors located behind dashboard assemblies or deep within V6/V8 engine valleys.
- Industrial Facility MRO: Servicing electrical junction boxes and hydraulic manifolds where hand clearance is restricted by high-voltage or high-pressure lines.
- Appliance & HVAC Repair: Navigating the narrow internal chassis of commercial refrigeration and heating units.
Frequently Asked Questions (B2B FAQ)
What is the advantage of a 90° tip over a 45° or straight plier? The Long Handle Straight Plier 90 provides maximum lateral leverage. It allows you to “hook” and pull components from around corners, which is often required when working behind structural obstructions where a straight plier would lose its grip.
Is the pivot point designed for high-repetition use? Yes. The Long Handle Straight Plier 90 features a precision-machined lap joint that ensures smooth, consistent action without the “wobble” found in lower-grade long-reach tools.
What is the handle material? The 1852-90 is equipped with ergonomic, non-slip dipped handles that provide a comfortable grip and insulation against cold metal in unheated industrial environments.
