PRODUCTS
56110-17M 17-Pieces Chisel Punch Set in Metal Stand
56110-17M 17-Piece Chisel Punch Set in Heavy-Duty Metal Stand
- 56110-17M 17-Piece Chisel & Punch Set in Metal Stand
- 56110-17M 17件組 專業級沖鑿組 附金屬置放架 (Cr-Mo鉻鉬鋼 / 含加長銷沖)
- 56110-17M 17件套 专业级冲凿组套 带金属支架 (Cr-Mo铬钼钢 / 含加长销冲)
- 56110-17M 17-tlg. Meißel- und Durchtreiber-Satz im Metallständer
- 56110-17M Jeu de 17 burins, bédanes et chasse-goupilles sur support métallique
- 56110-17M Juego de 17 cinceles, botadores y punzones en soporte metálico
- 56110-17M Set 17 scalpelli, cacciaspine e punzoni su supporto metallico
- 56110-17M Jogo de 17 peças de talhadeiras e punções em suporte metálico
- 56110-17M 17-delige beitel- en doorslagset in metalen standaard
- 56110-17M 17-elementowy zestaw przecinaków i wybijaków na stojaku metalowym
- 56110-17M Набор зубил, выколоток и кернеров 17 предм. на металлической подставке
- 56110-17M 17本組 チゼル・ポンチセット 金属製スタンド付 (Cr-Mo鋼製 / ロングピンポンチ入)
- 56110-17M 17피스 치즐 및 펀치 세트 스탠드 프레임 포함 (크롬몰리브덴강)
- 56110-17M طقم أزاميل وسنابك 17 قطعة في حامل معدني للورش (فولاذ كروم موليبدينوم)
- 56110-17M ชุดเหล็กสกัดและเหล็กส่ง 17 ชิ้น พร้อมแท่นวางโลหะ (เหล็ก Cr-Mo เกรดอุตสาหกรรม)
- 56110-17M Bộ đột và đục cơ khí 17 chi tiết kèm giá để kim loại (Thép Cr-Mo)
56110-17M is an industrial-duty 17-piece chisel and punch set engineered for heavy automotive repair, industrial machinery overhauls, and metal fabrication. Drop-forged from premium Chrome Molybdenum (Cr-Mo) steel, this set includes standard and 200 mm extra-long pin punches, heavy taper drift punches, a center punch, wide cold chisels, and a narrow cape chisel.
| 17PCS | 56110-17M | ||
|---|---|---|---|
| 5116M2 | 2x9.5x120 | 5110M02 | 2x8.0x115 |
| 5116M3 | 4x9.5x150 | 5110M03 | 3x8.0x125 |
| 5116M4 | 12x9.5x130 | 5110M03L | 3x9.5x200 |
| 5116M5 | 5x9.5x130 | 5110M04L | 4x9.5x200 |
| 5116M6 | 4x9.5x120 | 5110M05L | 5x9.5x200 |
| 5115M4 | 4x9.5x120 | 5110M06L | 6x12.7x200 |
| 5111M12 | 12x9.5x165 | 5110M08L | 8x12.7x200 |
| 5111M8 | 18x12.7x165 | 5110M10L | 10x12.7x200 |
| 5113M7 | 7x12.7x165 | ||
Steel Stand: 110x75x165mm, GW=18.5KGS/ 10SET  =1.3' |
|||
Feature
Q1: What types of tools are included in the HansTools 56110-17M set?
A: The 56110-17M includes 17 specialized striking tools:
- Pin Punches (5110M / 5110ML): 2 standard and 6 extra-long (200 mm) punches for driving out roll pins, dowels, and cotter pins.
- Taper Punches (5116M): 5 tapered drift punches for bolt hole alignment and breaking seized pins loose.
- Center Punch (5115M): 1 precision 4 mm center punch for dimpling layout marks and preventing drill bit walking.
- Cold Chisels (5111M): 2 flat cold chisels (12 mm and 18 mm) for cutting sheet metal, shearing rusted bolt heads, and splitting seized nuts.
- Cape Chisel (5113M): 1 narrow-blade 7 mm cape chisel specifically for grooving, cutting keyways, and slot clearing.
Q2: What is the benefit of the 200mm extra-long pin punches?
A: Standard pin punches are usually 115–150 mm long, which often leaves them too short to clear suspension knuckles, engine brackets, or transmission casings. The six 200 mm punches (3, 4, 5, 6, 8, 10 mm) provide the extended clearance needed to reach deep, recessed pins without hitting neighboring components.
Q3: How does differential heat treatment protect the technician?
A: If the striking face of a punch is too hard, hammer blows can cause the steel to shatter and eject high-velocity metal splinters. HansTools applies a differential heat-treatment process: the cutting and punch tips are hardened for high wear resistance, while the striking ends are tempered to a softer state. This allows the tool head to absorb heavy shock without spalling or mushrooming.
Q4: Can the metal organizer stand be mounted on a wall?
A: Yes. The included heavy-duty sheet metal stand is designed with a flat, stable base for bench-top placement and includes pre-punched mounting slots so it can be secured directly to workshop walls, tool pegboards, or service cart sides.
