PRODUCTS
Menu
BEX-H5 5-Pc Straight Screw Extractor Set
BEX-H5 5-Piece Straight Screw Extractor Set (1/8″–3/8″ / 3–9mm)
- BEX-H5 5-Piece Straight Flute Screw & Pipe Extractor Set (1/8″–3/8″ / 3–9mm)
- BEX-H5 5件組 直槽型斷頭螺絲與斷管取出器組 (適用鑽頭 3~9mm / 1/8″~3/8″)
- BEX-H5 5件套 直槽型断头螺丝与断管取出器组套 (适用钻头 3~9mm / 1/8″~3/8″)
- BEX-H5 5-tlg. Gerade genuteter Schrauben- und Rohrausdreher-Satz (1/8″–3/8″)
- BEX-H5 Jeu de 5 extracteurs droits pour vis et tubes cassés (1/8″–3/8″)
- BEX-H5 Juego de 5 extractores rectos para tornillos y tubos rotos (1/8″–3/8″)
- BEX-H5 Set 5 estrattori diritti per viti e tubi spezzati (1/8″–3/8″)
- BEX-H5 Jogo de 5 extratores retos para parafusos e tubos quebrados (1/8″–3/8″)
- BEX-H5 5-delige rechte schroef- en buisverwijderaarsset (1/8″–3/8″)
- BEX-H5 5-elementowy zestaw prostych wykrętaków do śrub i urwanych rur (1/8″–3/8″)
- BEX-H5 Набор прямых экстракторов для сломанных болтов и труб 5 предм. (1/8″–3/8″)
- BEX-H5 5本組 ストレートフルート式 スクリュー＆パイプエキストラクターセット (3〜9mm)
- BEX-H5 5피스 스트레이트 플루트 볼트 및 부러진 파이프 리무버 세트 (1/8″~3/8″)
- BEX-H5 طقم مستخرجات مستقيمة للمسامير والأنابيب المكسورة 5 قطع (1/8 إلى 3/8 بوصة)
- BEX-H5 ชุดถอนเกลียวซ้ายแบบร่องตรง สำหรับถอนน็อตขาดและท่อแตก 5 ชิ้น (ขนาด 1/8″–3/8″)
- BEX-H5 Bộ lấy bu lông và ống gãy rãnh thẳng 5 chi tiết (1/8″–3/8″)
BEX-H5 is a 5-piece industrial straight screw extractor set engineered to back out broken screws, sheared studs, and snapped threaded pipe ends without causing wall expansion. Unlike conventional spiral-flute extractors that wedge outward and jam hollowed fasteners tighter against casting threads, the BEX-H5 uses vertical splines that bite straight into pre-drilled pilot holes.
| ITEM NO. | DESCRIPTION (inch) |
|---|---|
| BEX-H5 | 1/8", 3/16", 15/64", 5/16" 3/8" (3, 5, 6, 8, 9mm) |
Feature
Product Features
- Straight-Flute Anti-Expansion Architecture: Multi-spline vertical flutes bite deeply into drilled pilot walls without exerting radial outward pressure, preventing hollowed screw shanks or thin pipe walls from expanding and locking into parent threads.
- Dual Screw & Pipe Extraction: Built to remove sheared engine bolts, broken screw threads, and snapped internal plumbing or pneumatic tube threads.
- Standard Drill Bit Sizing: Calibrated to work in conjunction with standard shop drill bits: 1/8″ (3 mm), 3/16″ (5 mm), 15/64″ (6 mm), 5/16″ (8 mm), and 3/8″ (9 mm).
- High-Torque Drive Head: Ground drive ends accommodate standard tap wrenches or adjustable wrenches for controlled counterclockwise extraction torque.
- Drop-Forged Alloy Steel Construction: Heat-treated alloy steel delivers high torsional resilience to resist snapping inside the pilot bore during heavy breakaway cycles.
- Clean Fastener Disengagement: Straight-spline geometry releases easily once the damaged fastener is extracted, preventing the tool from permanently binding inside the extracted core.
RELATED PRODUCTS
Related products
-
-
-
Construction Specialty Applied / Automotive
5700 PU Dead Blow Hammer | Oil Resistant PU Hammer Head Blow
Read more -
