PRODUCTS
Socket Rack with Spring-Steel Clamps | ¼” 3⁄8″ Drive
Socket Storage Rail: Heavy-Duty Rack with Spring-Steel Clamps
- Vide, avec etriers de retenue a garnir des douilles 1/4″, 3/8″ Dr
- Szyna gniazdowa z zaciskiem do napędu 1/4″, 3/8″
- Sockelschiene mit Klemme für 1/4″, 3/8″-Antrieb
- Vacio, con bridas de sujecion para vaso 1/4″, 3/8″ Dr
- سكة مقبس مع مشبك لمحرك الأقراص مقاس 3/8, 1/4 بوصة
- รางซ็อกเก็ตพร้อมแคลมป์สำหรับไดรฟ์ 1/4″, 3/8″
- 套筒夾
Socket Rack series is a high-density organization system engineered for professional tool management. Constructed from a rigid metal rail and equipped with high-tension spring-steel clamps, this rack ensures that sockets remain securely seated even in high-vibration environments or vertical storage. Designed to fit standard 1/4″, 3/8″, and 1/2″ drive sizes, it provides a modular solution for maintaining an accessible and inventory-ready workspace.
| ITEM NO. | SIZE |
|---|---|
| M360248 | 3/8"DR. x 8PCS x 215mm |
| M360260 | 3/8"DR. x 7PCS x 215mm |
| M360259 | 3/8"DR. x 9PCS x 215mm |
| M080057 | 3/8"DR. x 7PCS x 170mm |
| M080081 | 3/8"DR. x 4PCS x 170mm |
| M080109 | 3/8"DR. x 6PCS x 200mm |
| M560242 | 1/4"DR. x 7PCS, 3/8"DR. x 4PCS x 215mm |
| M080074 | 3/8"DR. |
| M361000 | 3/8"DR. x 10PCS x 320mm |
| M080106 | 3/8"DR. x 11PCS x 320mm |
| M361200 | 3/8"DR. x 12PCS x 320mm |
| M361301 | 3/8"DR. x 13PCS x 320mm |
| M361600 | 3/8"DR. x 16PCS x 380mm |
| M0800 | 3/8"DR. |
Feature
Technical Architecture & Retention Logic
- High-Tension Spring Steel Clips: Unlike plastic alternatives that become brittle or lose grip over time, these metal clamps utilize spring-tension technology to “lock” the socket in place, preventing accidental detachment during transport.
- Corrosion-Resistant Metal Rail: The base rail is manufactured from heavy-gauge steel with a polished finish, providing a rigid foundation that will not bend or warp under the weight of a full set of deep-impact sockets.
- Modular Slide Configuration: Clamps are mounted on a sliding track, allowing the user to customize the spacing between sockets. This is essential for accommodating a mix of standard and thin-wall or deep-impact sockets on a single rail.
- Drive Size Versatility: * 1/4″ Drive Rail: Optimized for small-profile ignition and electronic sockets.
- 3/8″ Drive Rail: The industrial standard for general automotive and MRO.
- 1/2″ Drive Rail: Heavy-duty spacing for large-diameter and high-torque sockets.
- Integrated Hanging Eyelet: Each rail features a pre-drilled mounting hole, enabling vertical wall storage or secure tethering within mobile tool carts.
B2B Procurement & Workshop ROI
- Inventory Control & Loss Prevention: A quick visual scan of the rack immediately identifies missing sockets, reducing the “lost tool” expense that plagues large-scale maintenance facilities.
- Optimized Drawer Density: The slim-profile design allows for maximum socket density within tool trolley drawers, freeing up valuable space for larger diagnostic equipment.
- High-Cycle Durability: Built to withstand the repetitive “on-off” cycles of a busy workshop, the steel clips maintain their retention force significantly longer than consumer-grade organizers.
FAQ Section
Will the clips hold heavy deep-impact sockets vertically? Yes. The spring-steel clamps are specifically tensioned to hold the weight of professional-grade chrome and impact sockets. Even when mounted vertically on a shadow board or a tool trolley door, the sockets will remain securely attached.
Can I add or remove clips from the rail? The rail features a modular design. Clips can be moved along the track for custom spacing or removed entirely to suit specific set requirements. Additional clips can often be sourced to increase the capacity of the rail for smaller diameter sockets.
Is this rack compatible with other brands of sockets? Yes. These racks are engineered to international ISO/DIN standards for 1/4″, 3/8″, and 1/2″ drives, making them compatible with any professional socket brand.
